Looking to modernise your existing gate motor without replacing the whole system? You’re in luck. In 2025, the smartest move in gate automation is adding a universal receiver — and at Gatehouse Security, we make that upgrade easy.
Whether you’ve got an old B&D, Elsema, ATA, or Boss motor, a universal receiver can instantly give your setup:
-
💪 Better range
-
🔗 Remote compatibility
-
⚙️ Modern features
-
💸 Huge cost savings
Let’s walk you through how (and why) to upgrade your gate motor with one.
🧠 What Is a Universal Receiver?
A universal gate receiver is a small control unit that connects to your existing motor. It acts as a new "brain" that listens for remote signals and triggers your gate to open or close.
Our Long Range Waterproof Universal Receiver is one of the best in the market, supporting most 433MHz remote brands and offering up to 1km range in open air.
🔧 Why Upgrade Your Gate with a Universal Receiver?
✅ 1. Keep Your Existing Motor
No need to replace a working motor just because it’s old or has a poor remote. A universal receiver gives it a second life with modern features.
✅ 2. Gain Long-Range Control
Open your gate from the bottom of the street or down the driveway — without getting close.
✅ 3. Add New Remotes Easily
Our receiver can learn most 433MHz remotes (including brands we stock), giving you total flexibility.
✅ 4. Waterproof and Outdoor-Ready
Mount it outdoors with peace of mind — it’s built to withstand the Aussie climate.
🔌 Step-by-Step: How to Install a Universal Receiver
Tools You’ll Need:
Screwdriver
Wire strippers (if necessary)
Electrical tape or connectors
Your new receiver + compatible remotes
🪛 Step 1: Power Down
Turn off power to your gate motor. Safety first!
🔄 Step 2: Identify Terminals
Open your gate motor’s control board. Look for the push button, trigger, or manual open terminals — usually marked as “COM” and “NO” or “PUSH.”
🔌 Step 3: Wire the Receiver
Connect the relay outputs from the receiver to the trigger terminals on your gate motor. Use the included wiring diagram from our product page or instruction sheet.
-
Red & Black wires: Power the receiver (12–24V AC/DC)
-
Blue & White wires: Connect to the gate motor trigger
📡 Step 4: Power On and Pair Remotes
Restore power and pair your remote(s) using the learn button on the receiver. Test the range!
🧪 Step 5: Mount and Secure
Mount the receiver box in a weather-safe position (if outdoors) and secure any wiring.
🔄 Compatible With Most Brands
Our receiver works with most 433MHz gate motors and remote systems in Australia, including:
-
B&D
-
Boss
-
Elsema
-
Steel-Line
-
Merlin
-
ATA
Not sure if it’s compatible? Contact us — our team will help you check before you buy.
🎯 Who This Upgrade is Perfect For
-
🏡 Homeowners wanting longer range and more reliable access
-
🛠️ Installers seeking a universal, cost-effective solution
-
🧓 Elderly users needing easier access from the car
-
🚛 Commercial gates where staff need better remote access
🛒 Ready to Upgrade?
Skip the full motor replacement. Upgrade the smart way with a universal long-range receiver from Gatehouse Security.
👉 Click here to shop the Waterproof Long Range Universal Receiver now
Leave a comment
All comments are moderated before being published.
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.